QuickSat

The app which simplifies the satellite!

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

CAHORS, manufacturer of satellite reception equipment for 25 years, has developed the QuickSat application to help you to install and align your Mono-reception and Multi-reception satellite antenna and to allow the reception of satellite television channels

This application guides you step by step while putting at your disposal several helpful tools to assist you with the installation and alignment of your antenna. QuickSat will also calculate the necessary adjustments!

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

The installation and the alignment of your antenna in 5 simple steps:

STEP 1: Choice of the type of antenna

> Mono-satellite: reception of 1 satellite

> Multi-satellite: reception of several satellites with BigBisat antenna only

STEP 2: Choice of the satellite

QuickSat proposes to you the list of satellites received in your area, this list is automatically filtered according to your geographical position. The list of the satellites is maintained up to date by our engineering department.

STEP 3: Precautions of installation

QuickSat explains you where and how to position your satellite antenna and provides 2 essential tools:

> VisionSat: with its calculation of increased reality this tools enables you to visualize the position of the satellites to be received! In order to assure you that the place chosen for the installation of your antenna is optimal.

> Tool “mast control”: allows checking that the support of your satellite antenna is installed correctly.

STEP 4: Calculations/ Results

QuickSat provides personalized information concerning the adjustment of your antenna:

> Antenna mono-satellite: Information of adjustment of the antenna: Elevation, Azimuth, Cross-polarization

> Multi-satellite antenna: in addition to the parameters of alignment of the antenna, QuickSat calculates the adjustment of the tilt angle and the exact position of each LNB. To align a BigBisat antenna becomes very simple then!

STEP 5: Toolbox: Checking of the mast - Elevation – Azimuth

Find all the QuickSat tools : mast control, VisionSat, simulation rise, azimuth

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

General Information:

This application requires the use of advanced functions of the Smartphone with a minimal quality of display; its operation can be faded on old generation Smartphones. QuickSat is compatible with all mono-satellite antennas; for the CAHORS antennas, Quicksat proposes more tools with exclusiveness of the alignment software for the BigBisat multi-satellite antenna.

该应用程序简化了卫星！

______________________________

卡奥尔，为25年的卫星接收设备的制造商，开发QuickSat的应用程序，以帮助您安装和单接收和多接收卫星天线对准，允许接收卫星电视频道

此应用程序将引导你一步一步地在您的处置，同时把一些有用的工具，以帮助您与您的天线的安装和校准。 QuickSat也将计算必要的调整！

______________________________

安装和对准你的天线在5个简单步骤：

步骤1：选择不同的天线

   单卫星：1卫星接收

   >多卫星接收仅几个卫星天线BigBisat的

 第2步：选择卫星

QuickSat建议您在您的地区接收卫星列表，这个列表会自动根据您的地理位置过滤。卫星列表保持到今天为止，我们的工程部门。

步骤3：安装注意事项

QuickSat解释你在哪里和如何定位您的卫星天线，并提供2个必不可少的工具：

   > VisionSat：其计算增加的​​现实工具使您能够想象​​要接收卫星的位置！为了向你保证，为你的天线安装位置的选择是最佳的。

   >工具“桅杆控制”：允许检查的支持，您的卫星天线的安装是否正确。

第4步：计算/结果

QuickSat关于调整天线提供个性化的信息：

   >天线单卫星：调整天线的信息：高程，方位，交叉极化

   >多卫星天线：除了对应的天线的参数，QuickSat计算的倾斜角的调整，每个LNB的确切位置。要对齐一个BigBisat天线就变得非常简单了！

STEP 5：工具箱：检查桅杆 - 仰角 - 方位角

所有QuickSat工具：肥大控制，VisionSat，模拟上升，方位

______________________________

一般资料：

此应用程序需要使用先进功能的智能手机用最小的显示质量，其操作可以褪色的老一代智能手机。 QuickSat兼容所有的单卫星天线，的卡奥尔天线，Quicksat排他性的BigBisat多卫星天线的校准软件提出了更多的工具。